정상문교수는,
정상문 담당교수
(043)261-3369
(043)269-2370
smjeong@chungbuk.ac.kr
1989.3-1993.2 고려대학교 화학공학과 공학사
1993.3-1995.2 한국과학기술원 화학공학과 공학석사
1995.3-1999.8 한국과학기술원 화학공학과 공학박사
2019. 1-2019. 12 한국화학공학회 조직이사
2019. 1-2019. 12 한국청정기술학회 산학이사
2018. 1-2018. 12 한국청정기술학회 총무이사
2017. 1-2018. 12 한국화학공학회 산학이사
2016. 1-2016. 12 한국화학공학회 국제이사
2014. 1-2014. 12 한국화학공학회 홍보이사
2014. 2-2015.1 University of Utah, Visiting research professor
2010.9- 현재 충북대학교 화학공학과
2004.12-2010.8 한국원자력연구원(KAERI) 선임연구원
2008.9-2010.8 한국과학기술연합대학원대학교 겸임부교수
2007.3-2008.3 University of Nottingham, UK, 방문연구원
2000.9-2004.12 LG화학 기술연구원 선임연구원
1999.9-2000.8 CPE Lyon, France 박사후연수
1) 전기화학적 소재합성 및 특성평가
2) 전기화학적 에너지저장 장치(이차전지/슈퍼커패시터)
3) 그린에너지 반응/공정
4) 고온용융염 기반 전기화학
1) Electrochemical material synthesis
2) Energy storage device (lithium secondary battery/supercapacitor)
3) Green energy process
4) Molten salt electrolysis (pyroprocessing)
Research Paper
100. J. Motanta, H.J. Kim, S.M. Jeong, J. Kim, J.H. Ahn, J.K. Kim, “Substrate-free FeS2 fiber-based electrode for high-performance flexible sodium ion battery,” Energ. Mater. Today, submitted (2019).
99. S.Y. Jeong, D.W. Kang, J.K Kim, S. Ghosh, S.M. Jeong, Y.C. Kang, J.S. Cho, “Multi-channel-contained few-layered MoSe2 nanosheet/N-doped carbon hybrid nanofibers prepared using diethylenetriamine as anodes for high-performance sodium-ion batteries,” J. Ind. Eng. Chem., accepted (2019).
98. Y. Kwon, J.H. Park, S.M. Kang, G.D. Nam, J.W. Lee, J.H. Kim, D. Kim, S.M. Jeong, J.H. Yu, J. H. Joo, “Breakthrough strategy for improving the oxygen permeability in the zirconia-based dual-phase membrane,” Energ. Environ. Sci., submitted (2019).
97. S. Ghosh, S.R. Polaki, G. Sahoo, E.M. Jin, M. Kamruddin, J.S. Cho, S.M. Jeong, “Designing metal oxide-vertical graphene nanosheets structures for 2.6 V aqueous asymmetric electrochemical capacitor,” J. Ind. Eng. Chem., 72, 107-116 (2019).
96. S.H. Lee, T.H. Lee, S.M. Jeong, J.M. Lee, “Economic analysis of a 600MWE ultra supercritical circulating fluidized bed power plant based on coal tax and biomass co-combustion plans,” Renewable Energy, 138, 121-127 (2019).
95. M.S. Jo, E.M. Jin, J.S. Cho, S.M. Jeong, “Improving of the photovoltaic characteristic of dye-sensitized solar cells using photoelectrode with electrospun porous TiO2 nanofiber,” Nanomaterials, 9, 95 (2019).
94. M.S. Jo, S. Ghosh, S.M. Jeong, Y.C. Kang, J.S. Cho, “Coral-like yolk-shell-structured nickel oxide/carbon composite microspheres for high-performance anodes in Li-ion storage,” Nano-Micro Lett., 11:3, 1-18 (2019).
93. S. Ghosh, W.D. Yong, E.M. Jin, S.R. Polaki, X.L. Wang, S.M. Jeong, H. Jun, “Mesoporous engineered carbon nanofiber for improved supercapacitor performance,” Korean J. Chem. Eng., 36, 312 (2019).
92. Y.X. Dong, B. Jin, S.H. Lee, X.L. Wnag, E.M. Jin, S.M. Jeong, “One-step hydrothermal synthesis of Ag decorated TiO2 nanoparticles for dye-sensitized solar cell application,” Renewable Energy, 135, 1207 (2019)
91. Y.X. Dong, E.M. Jin, S.M. Jeong, “Application of metal oxide nanofiber for improving photovoltaic properties of dye-sensitized solar cells,” Clean Technol., 24, 249-254 (2018).
90. E.M. Jin, S.M. Jeong, “Electrochemical properties of MnO2@HCS composite as supercapacitor electrode material,” Clean Technol., 24, 183-189 (2018).
89. B. H. Park, S. M. Jeong, “Application of phase-field theory to model uranium oxide reduction behavior in electrolytic reduction process,” J. Nucl. Fuel Cycle Waste Techonol., 16, 291-299 (2018)
88. S. Ghosh, S. M. Jeong, S. R. Polaki, “A Review on Metal Nitrides/Oxynitrides as an Emerging Supercapacitor Electrode Beyond Oxide,” Korean J. Chem. Eng., 35, 1389-1408 (2018)
87. J. Park, B. Lee, P. Shi, H. Kwon, S. M. Jeong, H. Jun “Methanol metabolism and archaeal community changes in a bioelectrochemical anaerobic sequencing batch reactor with copper-coated graphite cathode,” Bioresource Techonology, 259, 398-406 (2018).
86 S. Ghosh, S. R. Polaki, M. Kamruddin, S. M. Jeong, K. Ostrikov, “Plasma-electric field controlled growth of oriented graphene for energy storage applications,” J. Physics: D, 51, 145303 (2018).
85 B. H. Park, M.W. Lee, S. M. Jeong, “Electrochemical Behavior of Chalcogen and Halogen Fission Products in Pyro-electrochemical Reduction Process,” J. Appl. Electrochem., 48, 739-745 (2018).
84. D. Y. Wan, E. Baasanjav, H.-B. Jun, B. Jin, E. M. Jin, S. M. Jeong, “Effect of metal (Mn, Ti) doping on NCA cathode materials for lithium ion batteries,” J. Nanomaterials, Article ID 8082502, https://doi.org/10.1155/2018/8082502 (2018).
83. Z. Y. Fan, E. M. Jin, S. M. Jeong, “Enhanced electrochemical properties of NCA cathode materials for lithium ion battery by doping effect,” Kor. Chem. Eng. Res., 55, 861(2017)
82. T. Yang, W. Zhang, L. Li, B. Jin, E. Jin, S. Jeong., “In-situ synthesized ZnFe2O4 firmly anchored to the surface of MWCNTs as a long-life anode material with high lithium storage performance,” Appl. Surf. Sci., 425, 978-987 (2017).
81. E. M. Jin, J. G. Lim, S. M. Jeong, “Facile synthesis of graphene-wrapped CNT-MnO2 nanocomposites for asymmetric electrochemical capacitors,” J. Ind. Eng. Chem., 54, 421-427 (2017).
80. M W. Lee, S. M. Jeong, “Pyro-electrochemical reduction of a mixture of rare earth oxides and NiO in LiCl molten salt,” Kor. Chem. Eng. Res., 55, 379-384 (2017).
79. E. M. Jin, G.-E. Lee, B.-K. Na, S. M. Jeong., “Electrochemical properties of commercial NCA cathode materials for high capacity of lithium ion battery,” Kor. Chem. Eng. Res., 55, 163-169 (2017).
78. E. M. Jin, H. J. Lee, H. B. Jun, S. M. Jeong, “Electrochemical properties of α-Co(OH)2/graphene nano-flake thin film for use as a hybrid supercapacitor,” Korean J. Chem. Eng., 34, 885-891 (2017).
77 M. W. Lee, E. Y. Choi, S. C. Jeon, J. Lee, S. B. Park, S. Paek, M. F. Simpson, S. M. Jeong, “Enhanced electrochemical reduction of rare earth oxides in simulated oxide fuel via co-reduction of NiO in Li2O-LiCl salt,” Electrochem. Comm., 72, 23-26 (2016).
76. H. Y. Jeong, E. M. Jin, S. M. Jeong, “Electrochemical properties of sulfur/carbon composite for lithium sulfur battery applications,” Journal of Industrial Science and Technology Institute, 30, 51-54 (2016).
75. E. M. Jin, H. Jeong, B. K. Na, S. M. Jeong, “Hydrothermal carbon nanosphere (CNS) based CNS/S composite as a cathode material for lithium-sulfur batteries,” J. Nanosci. Nanotechnol., 16, 10475–10481 (2016).
74. D. Rappleye, S. M. Jeong, M. Simpson, “Electroanalytical measurements of binary-analyte mixtures in molten LiCl-KCl eutectic: gadolinium (III)- and lanthanum (III)-chloride,” J. Electrochem. Soc., 163, B507-516 (2016).
73. E.M. Jin, S.M. Jeong, H.C. Kang, H.B. Gu, “Photovoltaic Effect of Metal-doped TiO2 Nanoparticles for Dye-sensitized Solar Cells,” ECS J. Solid State Sci. Technol., 5, Q109-Q114 (2016).
72. K. H. Jeong, Hyung Jung Lee, Michael F. Simpson and S. M. Jeong, “Electrochemical Synthesis of Graphene/MnO2 Nano-Composite for Application to Supercapacitor Electrode ,” J. Nanosci. Nanotechnol., 16, 4620-4625 (2016).
71. H. J. Lee, E. M. Jin, S. M. Jeong, “Electrochemical properties of porous Co(OH)2 nano-flake film prepared by electro-deposition for supercapacitor,” Korean Chem. Eng. Res., 54, 157-162 (2016).
70. M. Stika, D. Rappleye, S.M. Jeong, M.F. Simpson, “Development of on-line pyroprocessing for liquid thorium fueled reactors,” AIChE J., 62, 1236-1243 (2016).
69. J. A. Shin, E. M. Jin, B. K. Na, H. B. Gu, W. L. Wang, S. M. Jeong, “Facile preparation and electrochemical properties of carbon-enfolded sulfur particles for Li-S battery application,” J. Electrochem. Soc., 163, A57-A61 (2016).
68. D. Rappleye, S. M. Jeong, M. Gonzalez, L. C. Hansen, M. F. Simpson, “Application of voltammetry to measurement of concentrations of multiple lanthanide ions in molten LiCl-KCl,” J. Nuclear Fuel Cycle and Waste Technology, S, 29-38 (2015).
67. E. Y. Choi, S. M. Jeong, “Electrochemical processing of spent nuclear fuels: An overview of oxide reduction in pyroprocessing technology,” Progress in Natural Science: Materials International, 25, 572-582 (2015).
66. E. M. Jin, J. Y. Park, H. B. Gu, and S. M. Jeong, “Synthesis of SnO2 hollow fiber using kapok biotemplate for application in dye-sensitized solar cells,” Mater. Lett., 159, 321-324 (2015).
65. J. G. Lim and S. M. Jeong, “Preparation of La0.5Nd0.5Ni5 alloy by an electrochemical reduction in molten LiCl,” Korean Chem. Eng. Res., 53, 145-149 (2015).
64. H. Jeong and S. M. Jeong, "Electrochemical properties of graphene-vanadium oxide composite prepared by electro-deposition for electrochemical capacitors," Korean Chem. Eng. Res., 53, 131-136 (2015).
63. H. S. Ji, H. Y. Ryu, S. M. Jeong and M. F. Simpson, “A direct electrochemical reduction from mixed oxide to NdNi5 alloy in molten LiCl,” J. Ind. Eng. Chem., 24, 259-265 (2015).
62. D. Rappleye, S. M. Jeong and Michael F. Simpson “Application of multivariate analysis techniques to safeguards of the electrochemical treatment of used nuclear fuel,” Annals of Nuclear Energy, 77, 265-272 (2015).
61. H. V. Ijije, R. C. Lawrence, N. Siambun, S. M. Jeong, D. A. Jewell, D. Hu and G. Z. Chen, “Electro-deposition and re-oxidation of carbon in carbonate-containing molten salts,” Faraday Discuss., 172, 105-116 (2014).
60. E. M. Jin, Y. Y. Park, K. J. Hwang, H. B. Gu and S. M. Jeong, “Biotemplated Hybrid TiO2 Nanoparticle and TiO2-SiO2 Composites for Dye-Sensitized Solar Cells,” Mater. Lett., 131, 190-193 (2014).
59. E. M. Jin, J. Y. Park, X. G. Zhao, I. H. Lee, S. M. Jeong and H. B. Gu, “Photovoltaic properties of TiO2-ZrO2 fiber composite electrodes for dye-sensitized solar cells,” Mater. Lett., 126, 281-284 (2014).
58. H. Y. Ryu and S. M. Jeong, “Determination of diffusion coefficients of Mg2+ ions from molten LiCl-KCl-MgCl2,” Asian J. Chem., 26, 4011-4014 (2014).
57. H. Y. Ryu, H. S. Ji, S. M. Jeong and Michael F. Simpson, “Formation of Mg-Li alloy by electro-intercalation of Li+ ions on a solid Mg cathode in an eutectic LiCl-KCl salt,” J. Chem. Eng. Jpn, 47, 750-755 (2014).
56. H. M. Jeong, M. W. Seo, S. M. Jeong, B. K. Na, S. J. Yoon, J. G. Lee and W. J. Lee, “Pyrolysis kinetics of coking coal mixed with biomass under non-isothermal and isothermal conditions,” Bioresources technology, 155, 442-445 (2014).
55. K. M. Yang, Y. C. Kang, S. M. Jeong, Y. J. Choi, and Y. S. Kim, “Electrochemical properties of spherical hollow composite powders with variations Li4Ti5O12/SnO2 ratios prepared by spray pyrolysis,” Int. J. Electrochem. Sci., 8, 11972-11983 (2013).
54. M. H. Kim, Y. C. Kang, S. M. Jeong, Y. J. Choi, and Y. S. Kim, “Morphologies and electrochemical properties of 0.6Li2MnO30.4LiCoO2 composite cathode powder prepared by spray pyrolysis,” Materials Chemistry and Physics, 142, 438-444 (2013).
53. K. H. Jeong and S. M. Jeong, “Enhanced capacitance of unexfoliated graphite oxide by coupled electro-deoxidation/functionalization in an alkali solution,” Electrochimica Acta, 108, 810-807 (2013).
52. H. S. Ji, H. Y. Ryu, S. M. Jeong, and S. W. Cho, “Fast Electrochemical Synthesis of NdNi5 Hydrogen Storage Alloy in Molten Salt,” Chem. Lett., 42, 1182-1184 (2013).
51. K. H. Jeong and S. M. Jeong, “Electrochemical behavior of reduced graphene oxide in KOH solution,” Journal of Industrial Science and Technology Institute, 27, 49-54 (2013).
50. E. Y. Choi, J. K. Kim, H. S. Im, I. K. Choi, S. H. Na, J. W. Lee, S. M. Jeong and J. M. Hur, “Effect of the UO2 form on the electrochemical reduction rate in a LiCl molten salt,” J. Nucl. Mater., 437, 178-187 (2013).
49. K. H. Jeong, H. M. Jeong, S. M. Jeong, K. Y. Jung, E. Y. Choi, Y. C. Kang, “Electro-deoxidation behavior of graphite oxide in aqueous solution,” J. Chem. Eng. Jpn, 46, 245-249 (2013).
48. H. Y. Ryu, H. S. Ji, K. H. Jeong, H. M. Jeong, S. M. Jeong, Y. C. Kang and J. G. Kim, “Electrochemical carbon formation from a graphite anode in Li2O/LiCl molten salt,” Asian J. Chem., 25, 7019-7022 (2013).
47. J. B. Lee, S. N. Chun, K. B. Hur, and S. M. Jeong, “Effect of H2SO4 concentration in washing solution on regeneration of commercial selective catalytic reduction catalyst,” Koran J. Chem. Eng., 29(2), 270-276, Feb. (2012).
46. H.-S. Shin, J.-M. Hur, S. M. Jeong and K. Y. Jung, “Direct electrochemical reduction of titanium dioxide in molten lithium chloride,” J. Ind. Eng. Chem. Res., 18(1), 438-442 (2012).
45. E. Y. Choi, I. K. Choi, J. M. Hur, D. S. Kang, H. S. Shin, and S. M. Jeong, “In-situ Electrochemical Measurement of O2- Concentration in Molten Li2O/LiCl during Uranium Oxide Reduction Process,” Electrochemical and Solid-State Letters, 15(3), E11-E13 Jan. (2012).
44. H. J. Choi, S. M. Jeong, and B. H. Lee, “Liquefaction Characteristics of ABS-Polyethylene Mixture by a Low-Temperature Pyrolysis,” Korean Chem. Eng. Res., 50(2), 223-228 Apr. (2012).
43. E. Y. Choi, J. W. Lee, J. J. Park, J. M. Hur, J. K. Kim, K. Y. Jung, and S. M. Jeong, “Electrochemical reduction behavior of a highly porous SIMFUEL particle in a LiCl molten salt,” Chem. Eng. J., 207-208, 514-520 (2012).
42. H. S. Ji, H. Y. Ryu, H. M. Jeong, K. H. Jeong, and S. M. Jeong, “An electrochemical reduction behavior of TiO2 pellet in molten calcium chloride,” J. of the Korean Radioactive Waste Soc., 10(2), 97-104 (2012)
41. H. Y. Ryu, S. M. Jeong and J. G. Kim, “Electrochemical behavior of Mg2+ ions MgCl2-CaCl2-NaCl molten salt,” Korean Chem. Eng. Res., 50(6), 939-944 (2012)
40. M. C. Maniquiz, K. Y. Jung, and S. M. Jeong, “Luminescence Comparison and Enhancement of Ce-doped Yttrium Aluminum Garnet Phosphor via Cation Substitution and Adding Flux,” J. Eelectrochem. Soc., 158, H697-H703 (2011).
39. H. J. Choi, S. M. Jeong, and B. H. Lee, “Study on the Liquefaction Characteristics of ABS Resin in a Low-Temperature Pyrolysis,” Korean Chem. Eng. Res., 49, 417-422, Aug. (2011).
38. E. Y. Choi, J.-M. Hur, I. K. Choi, S. G. Kwon, D. S. Kang, S. S. Hong, H.-S. Shin, M. A. Yoo, and S. M. Jeong, “Electrochemical Reduction of Porous 17 kg Uranium Oxide Pellets by Selection of an Optimal Cathode/Anode Surface Area Ratio,” J. Nucl. Mater., 418, 87-92, Nov. (2011).
37. J.-M. Hur, S.-S. Hong, S. M. Jeong, “Development of an Oxide Reduction Process for the Treatment of PWR Spent Fuel”, J. of the Korean Radioactive Waste Soc., 8, 77-84 (2010).
36. S. M. Jeong, H. S. Shin, S.-S. Hong, J.-M. Hur, J.-B. Doh, H. S. Lee and J. J. Park, “Electrochemical Reduction Behavior of U3O8 Powder in an LiCl Molten Salt,” Electrochimica Acta, 55, 1749-1755 (2010).
35. J.-M. Hur, S. M. Jeong and H. S. Lee, “Molten Salt Vaporization during the Electrolytic Reduction Process,” Nucl. Eng. Technol., 42, 73-78 (2010)
34. J.-M. Hur, S. M. Jeong and H. S. Lee, “Underpotential Deposition of Li in a Molten LiCl-Li2O Electrolyte for the Electrochemical Reduction of U from Uranium Oxides,” Elecrochem. Comm., 12, 706-709 (2010)
33. S. M. Jeong, B. H. Park, J.-M. Hur, C.-S. Seo, H. S. Lee and K. C. Song, “An Experimental Study on an Electrochemical Reduction of an Oxide Mixture in the Advanced Spent-Fuel Conditioning Process,” Nucl. Eng. Technol., 42, 183-192 (2010)
32. M. C. Maniquiz, K. Y. Jung, and S. M. Jeong, “Luminescence Characteristics of Y3Al5-2y(Mg,Si)yO12:Ce Phosphor Prepared by Spray Pyrolysis,” J. Eelectrochem. Soc., 157, H1135-H1139 (2010).
31. S. M. Jeong and H.-S. Shin, S.-H. Cho, J.-M. Hur and H. S. Lee, “Electrochemical Behavior of a Platinum Anode for Reduction of Uranium Oxide in a LiCl Molten Salt,” Electrochimica Acta, 54, 6335-6340 (2009).
30. S. M. Jeong, J.-M. Hur and H. S. Lee, “Kinetic Modeling Study of a Voloxidation for the Production of U3O8 Powder from a UO2 Pellet,” Nucl. Eng. Technol., 41, 1073-1078 (2009).
29. S. M. Jeong, J.-M. Hur, S. S. Hong, D. S. Kang, M. S. Jeong, .-S. Seo, J.-S. Yoon and S.-W. Park, “An Electrolytic Reduction of Uranium Oxide in the Advanced Spent Fuel Conditioning Process,” Nucl. Technol., 162, 184-191 (2008).
28. S. M. Jeong, H. Y. Yoo, J.-M. Hur and C.-S. Seo, “Preparation of Metallic Niobium from Niobium Pentoxide by an Electrolytic Reduction in a LiCl-Li2O Molten Salt,” J. Alloys and Compounds, 452, 27-31 (2008).
27. J.-M. Hur, S.-H. Cho, I. K. Choi, S. M. Jeong and C.-S. Seo, “Preparation and Melting of U from U3O8,” J. Alloys and Compounds, 452, 23-26 (2008).
26. S. M. Jeong, J.-Y. Jung, C.-S. Seo and S.-W, Park, “Characteristics of an Electrochemical Reduction of Ta2O5 to Metallic Tantalum in a LiCl-Li2O Molten Salt,” J. Alloys and Compounds, 440, 210-215 (2007).
25. J.-M. Hur, S. C. Lee, S. M. Jeong and C.-S. Seo, “Electrochemical reduction of TiO2 in molten LiCl-Li2O,” Chemistry Letters, 36 (8) 1028-1029, AUG 5 (2007).
24. C. -S. Seo, S. M. Jeong, S. -B. Park, J. –Y. Jung, S.-W. Park and S.-H. Kim, “Preparation of Tantalum Powder from Ta2O5 by an Electrochemical Reduction in an LiCl-Li2O Molten Salt System,” J. Chem. Eng. Jpn, 39, 77-82, Jan., 2006.
23. S. M. Jeong, S.-B. Park, S.-S. Hong, S.-C. Seo and S.-W. Park, “Electrolytic Production of Metallic Uranium form U3O8 in a 20 kg-Batch Scale Reactor,” J. Radioanal. Nucl. Chem., 268, 349-356, May (2006).
22. S.-B. Park, B. H. Park, S. M. Jeong, J.-M. Hur, C.-S. Seo and S.-W. Park, “Characteristics of an Integrated Cathode Assembly for an Electrolytic Reduction of Uranium Oxide in LiCl-Li2O Molten Salt,” J. Radioanal. Nucl. Chem., 268, 489-495(2006).
21. S. M. Jeong, K. C. Kwon, B. H. Park and S.-C. Seo, “A Kinetic Study of the Oxidation of Uranium Dioxide,” Reaction Kinetics and Catalysis Letter, 89, 269-275 (2006).
20. B. H. Park, S. B. Park, S. M. Jeong, C.-S. Seo and S.-W. Park, “Electrolytic Reduction of Spent Oxide Fuel in a Molten LiCl-Li2O System,” J. Radioanal. Nucl. Chem., 270, 575-583 (2006).
19. W.–H. Lee, S. M. Jeong, J. H. Chae and J. -H. Kang, “Coke Formation on KVO3-B2O3/SA5203 Catalysts in the Catalytic Pyrolysis of Naphtha,” Ind. Eng. Chem. Res, 43, 1820-1827, Apr., 2004.
18. S. A. Rho, S. H. Jung, S. M. Jeong and S. D. Kim, “Selective Catalytic Reduction by Urea in a Fluidized-Bed Reactor,” J. Chem. Technol. Biotechnol., 78, 1104-1109, Oct. 2003.
17. J. H. Chae, Y. C. Byun, S. M. Jeong and W. H. Lee, “Catalytic Cracking of Naphtha over Alumina Catalysts,” HWAHAK KONGHAK, 40, 75-81, Feb. 2002.
16. S. M. Jeong, J. H. Chae, J. –H. Kang, S. H. Lee and W. –H. Lee, “Catalytic Pyrolysis of Naphtha on the KVO3-Based Catalyst,” Catal. Today, 74, 257-264, June 2002.
15. S. M. Jeong, Y. C. Byun, J. H. Chae and W. –H. Lee, “Coke Formation on the Surface of Al2O3 in the Catalytic Pyrolysis of Naphtha,” Korean J. Chem. Eng., 18, 842-847, Nov. 2001.
14. S. M. Jeong, J. H. Chae and W. –H. Lee, “Study on the Catalytic Pyrolysis of Naphtha over a KVO3/Al2O3 Catalyst for Production of Light Olefin,” Ind. Eng. Chem. Res., 40, 6081-6086, Dec. 2001.
13. T. H. Lim, S. M. Jeong, S. D. Kim and J. Gyenis, “Photocatalytic Decomposition of NO by TiO2 Particles,” J. Photochem. Photobiol. A: Chem., 134, 209-217, June 2000.
12. S. M. Jeong and S. D. Kim, “Removal of NOX and SO2 by CuO/Al2O3 Sorbent/Catalyst in a Fluidized Bed Reactor,” Ind. Eng. Chem. Res., 39, 1911-1916, June 2000.
11. S. K. Kang, S. M. Jeong and S. D. Kim, “Quantitative XRD Analysis for Sulfation of Limestone in Flue Gas Desulfurization,” Ind. Eng. Chem. Res., 39, 2496-2504, July 2000.
10. S. M. Jeong and S. D. Kim, “Development of CuO/Al2O3 Process for Flue Gas Cleanup,” Journal de l’ASCoF, 25, 15-23, June 2000.
9. T. H. Lim, S. M. Jeong, S. D. Kim and J. Gyenis, “Degradation characteristics of NO by photocatalysis with TiO2 and CuO/TiO2,” Reaction Kinetics and Catalysis Letter, 71, 223-229, Nov. 2000.
8. S. H. Lee, S. M. Jeong, Y. J. Kim, J. H. Bang, J. M. Lee, J. S. Kim and S. D. Kim, “Oxidation reaction of NH3 on Calcined Limestone in Coal Combustor,” HWAHAK KONGHAK, 38, 706-710, Oct. 2000.
7. K. S. Yoo, S. M. Jeong and S. D. Kim, “Sulfation Kinetics of CuO Loaded Silica-Alumina Sorbent,” HWAHAK KONGHAK, 37, 229-234, Apr. 1999.
6. S. M. Jeong, S. H. Jung, K. S. Yoo and S. D. Kim, “Selective Catalytic Reduction of NO by NH3 over Bulk Sulfated CuO/Al2O3 Catalyst,” Ind. Eng. Chem. Res., 38, 2210-2215, June 1999.
5. S. M. Jeong and S. D. Kim, “NOX Removal by the Selective Noncatalytic Reduction with Urea Solution in a Fluidized Bed Reactor,” Korean J. Chem. Eng., 16, 614-617, Sep. 1999.
4. Y. I. Lim, K. S. Yoo, S. M. Jeong, S. D. Kim, J. B. Lee and B. S. Choi, “Removal of NOX from Flue Gases with the Injection of Urea Solution,” HWAHAK KONGHAK, 35, 83-89, Feb. 1997.
3. S. M. Jeong, K. S. Yoo and S. D. Kim, “Effect of SO2 Gas on Regeneration of Sulfated CuO/Al2O3 Sorbent,” HWAHAK KONGHAK, 35, 116-120, Feb. 1997.
2. S. M. Jeong and S. D. Kim, “Enhancement of SO2 Sorption Capacity of CuO/Al2O3 Sorbent by Alkali-Salt Promoter,” Ind. Eng. Chem. Res., 36, 5425-5431, Dec. 1997.
1. K. S. Yoo, S. M. Jeong, S. D. Kim and S. B. Park, “Regeneration of Sulfated Alumina Support in CuO/Al2O3 Sorbent by Hydrogen,” Ind. Eng. Chem. Res., 35, 1543-1549, May 1996.

Patent
1. S. M. Jeong, K. S. Yoo and S. D. Kim, “감마-알루미나에 알칼리염 및 산화구리가 담지되어 있는 흡수제 Sorbent impregnated alkali salts and CuO in -Al2O3”, Korea Patent, 10-222918. 1999.07.07
2. S. M. Jeong, K. S. Yoo and S. D. Kim, “-Al2O3 sorbent impregnated with alkali salt and CuO” U.S. Patent, US 6,224,840.
3. S. D. Kim, T. H. Lim and S. M. Jeong, “애뉼러스 형태의 좁은 간격을 갖는 이차원 유동층 광촉매반응기 및 그를 이용한 산화질소의 광분해방법Modified 2-Dimensional Photocatalyst Fluidized Bed Reactor with Annulus”, Korea Patent, 10-358950.
4. J. H. Chae, W. –H. Lee, S. M. Jeong, and K. H. Park, “Pyrolysis Tube and Pyrolysis Method for Using the Same ”, Korea Patent, 10-0419065.
5. J. H. Chae, S. M. Jeong and W. –H. Lee, “Steam Cracking Catalysts of Hydrocarbon for Olefins Production”, Korea Patent, 10-0409083.
6. J. H. Chae, W. –H. Lee, S. M. Jeong, and K. H. Park, “Pyrolysis Tube and Pyrolysis Method for Using the Same”, PCT Patent, PCT/KR02/00387.
7. J. H. Chae, W. –H. Lee, S. M. Jeong, and J. H. Kang, “Hydrocarbon Pyrolysis Process -”, Korea Patent, 10-0440479.
8. J. H. Chae, W. –H. Lee, S. M. Jeong, and J. H. Kang, “Hydrocarbon Pyrolysis Process”, PCT Patent, PCT/KR02/02054.
9. S. M. Jeong, W. –H. Lee, J. H. Chae, J. H. Kang, and S. K. Park, “Hydrocarbon Steam Cracking Catalyst for Olefin Preparation, Method for Preparing the Same, and Olefin Preparation Method Using the Same”, Korea Patent, 10-0544880.
10. S. M. Jeong, W. –H. Lee, J. H. Chae, J. H. Kang, and S. K. Park, “Hydrocarbon Steam Cracking Catalyst for Olefin Preparation, Method for Preparing the Same, and Olefin Preparation Method Using the Same”, PCT Patent, PCT/KR02/01815.
11. J. H. Kang, W.-H. Lee, S. M. Jeong, S. K. Park, and J. H. Chae, “Hydrocarbon Steam Cracking Catalyst for Olefin Preparation, Method for Preparing the Same, and Olefin Preparation Method Using the Same”, Korea Patent, 10-0523886.
12. Igor N. Filimonov, S. M. Jeong, W. H. Lee, J. H. Kang, and J. H. Song, “Hydrocarbon Cracking Catalyst Using Chemical Liquid Deposition and Method for Preparing the Same”, Korea Patent, 10-0638444.
13. Igor N. Filimonov, S. M. Jeong, W. H. Lee, J. H. Kang, and J. H. Song, “Hydrocarbon Cracking Catalyst Using Chemical Liquid Deposition and Method for Preparing the Same”, PCT Patent, PCT/KR05/03457
14. S.-B. Park, S. M. Jeong, J. H. Lee, C.-S. Seo, S.-W. Park, and E.-H. Kim, “A Method of Producing Tantalum or Niobium Powder for Capacitor”, Korea Patent, 10-0684416.
15. J.H. Song, W.H. Lee, J.S. Choi, S.M. Jeong and J.H. Kang, “Decomposition catalyst for hydrocarbon and preparation method thereof”, Korea Patent, 10-0822728. (2008)
16. S. M. Jeong, S.-B. Park, J. H. Lee, C.-S. Seo, S.-W. Park, and E.-H. Kim, “Method of Producing Tantalum or Niobium Powder for Capacitor”, Japan patent, 4511498.
17. 이재원, 박장진, 박근일, 이정원, 이해원, 신진명, 허진목, 정상문, 양문상, 송기찬, 전해 환원 공정을 위한 사용후 핵 연료로부터 다공성 그래뉼을 제조하는 방법 (PREPARATION METHOD OF POROUS GRANULES FROM SPENT NUCLEAR FUEL FOR ELECTRONIC REDUCTION PROCESS), 2011.03.02, 10-1020783.
18. 최은영, 정상문, 허진목, 금속 산화물의 전해환원공정 중의 산소이온 농도 측정방법 (The method for measurement of oxygen ion concentration in the electrochemical reduction of metal oxide), 2012.03.26 (등록), 등록번호 10-1132357.
19. 정상문, 허진목, 홍순석, 최은영, 고온용융염 전기화학을 위한 기준전극 및 이의 제조방법 (A Reference Electrode for Electrochemistry of Molten Salt and a Preparation Method for the Same), 2012.04.09, 등록번호 10-1136903.
20. 허진목, 신호섭, 홍순석, 정상문, 이한수, 금속재질의 양극덮개를 포함하는 전해환원장치 및 이를 이용한 전해환원 방법, 2012.06.28, 등록번호 10-1162538.
21. 정상문, 지현섭, 류효열, 혼합금속산화물로부터 고온 용융염 전해환원에 의한 니켈네오디뮴 합금 제조방법, 2014. 03. 31. 등록번호 10-1385528